Josh lavallee
Owner/Operator
Services











Typical cost to fabricate, weld and install flexpipe/flange assembly.
Complex systems may require additional labor time to remove/replace components billed out at $125/hr plus shop supplies.
Final cost may very depending on components required.
Complex systems may require additional labor time to remove/replace components billed out at $125/hr plus shop supplies.
Final cost may very depending on components required.
In stock performance mufflers available
House brand muffler installation typically between $250-$300+tax
Straight pipe/muffler delete typically between $225-$250+ tax
House brand muffler installation typically between $250-$300+tax
Straight pipe/muffler delete typically between $225-$250+ tax
Typical cost to fabricate, weld and install an exhaust leak patch repair pipe.
Complex systems may require additional labor to remove/replace components billed out at $125/hr plus shop supplies.
Complex systems may require additional labor to remove/replace components billed out at $125/hr plus shop supplies.
Typical cost to fabricate, weld and install a resonator/cat assembly.
We have in stock performance and commuter resonators/catalytic converters available for an additional cost.
Euro/Performance/Luxury cars can typically expect a $30 additional charge.
Complex systems may require additional labor to remove/replace components billed out at $125/hr plus shop supplies.
We have in stock performance and commuter resonators/catalytic converters available for an additional cost.
Euro/Performance/Luxury cars can typically expect a $30 additional charge.
Complex systems may require additional labor to remove/replace components billed out at $125/hr plus shop supplies.
To book a Custom Dual Exhaust System please call 2048814609 as this service is not available for online scheduling.
This option is for our premium in house True Dual full exhaust system, also referred to as a "Cat-Back" dual exhaust system.
Features: precision bent tubing up to 21/2", custom reinforced hangers, X or H pipe as standard, MIG welded for maximum durability.
🔥BUILDERS BUNDLE BONUS PACK!🔥
Receive a $75 credit against labor when you add a muffler and resonators or exhaust tips to your system!
Our most popular in stock premium stainless exhaust tips range from $65.99-$85.99 ea
Performance mufflers range from $129.99-$149.99 ea
Our tone enhancing resonators range from $89.99-$119.99
Upgrade to 3" tubing $100
Rear section flanges for easier removal and assembly $70
Please note an extra fee of $200 may be applicable to luxury/performance vehicles due to the added complexity of their systems. If you are unsure if your vehicle meets this criteria please give us a call at 204-881-4609
This option is for our premium in house True Dual full exhaust system, also referred to as a "Cat-Back" dual exhaust system.
Features: precision bent tubing up to 21/2", custom reinforced hangers, X or H pipe as standard, MIG welded for maximum durability.
🔥BUILDERS BUNDLE BONUS PACK!🔥
Receive a $75 credit against labor when you add a muffler and resonators or exhaust tips to your system!
Our most popular in stock premium stainless exhaust tips range from $65.99-$85.99 ea
Performance mufflers range from $129.99-$149.99 ea
Our tone enhancing resonators range from $89.99-$119.99
Upgrade to 3" tubing $100
Rear section flanges for easier removal and assembly $70
Please note an extra fee of $200 may be applicable to luxury/performance vehicles due to the added complexity of their systems. If you are unsure if your vehicle meets this criteria please give us a call at 204-881-4609
This option is for our premium in house full exhaust system, also referred to as a "Cat-Back" system and can be configured as a “straight pipe” or with components.
Features: precision bent tubing up to 21/2", custom reinforced hangers, extra thick no warping 3/8" 2 bolt flanges as well as premium gaskets and hardware to go with it. As always, fully MIG welded to seal the deal.
🔥BUILDERS BUNDLE BONUS PACK!🔥
Add on a muffler, and resonator or exhaust tip to your full exhaust system and receive a $50 credit against labor 💪🏽
Our most popular in stock premium stainless exhaust tips range from $65.99-$85.99 ea
Performance mufflers range from $129.99-$149.99 ea
Our tone refining resonators range from $90-$120
Upgrade to 3" tubing $50
Please note an extra fee of up to $100 may be applicable to luxury/euro vehicles due to the added complexity of their systems. If you are unsure if your vehicle meets this criteria please give us a call at 204-881-4609
Features: precision bent tubing up to 21/2", custom reinforced hangers, extra thick no warping 3/8" 2 bolt flanges as well as premium gaskets and hardware to go with it. As always, fully MIG welded to seal the deal.
🔥BUILDERS BUNDLE BONUS PACK!🔥
Add on a muffler, and resonator or exhaust tip to your full exhaust system and receive a $50 credit against labor 💪🏽
Our most popular in stock premium stainless exhaust tips range from $65.99-$85.99 ea
Performance mufflers range from $129.99-$149.99 ea
Our tone refining resonators range from $90-$120
Upgrade to 3" tubing $50
Please note an extra fee of up to $100 may be applicable to luxury/euro vehicles due to the added complexity of their systems. If you are unsure if your vehicle meets this criteria please give us a call at 204-881-4609
Typical cost to fabricate, weld and install dual muffler assembly.
We have in stock performance and commuter mufflers and tips available.
Complex systems may require additional labor/specialty components to be billed out at $125/hr plus shop supplies and parts.
We have in stock performance and commuter mufflers and tips available.
Complex systems may require additional labor/specialty components to be billed out at $125/hr plus shop supplies and parts.
Typical cost to fabricate, weld and install a single muffler assembly.
We have in stock performance and commuter mufflers and tips available for purchase.
Complex systems may require additional labor to remove/replace components which will be billed out at $125/hr plus shop supplies
We have in stock performance and commuter mufflers and tips available for purchase.
Complex systems may require additional labor to remove/replace components which will be billed out at $125/hr plus shop supplies
Common small weld repairs include, lawn mowers and mower decks, patio furniture, stools and chairs, brackets etc. these common repairs range from $75-$150, if you would like confirmation as to which end of the pricing spectrum your repair falls under we are more than happy to provide a free assessment in person or over the phone.
Price to TIG Weld "on the bench" size cast aluminum repair.
Common repairs: motor and transmission cases, chain guards, props and skegs, oil pans, etc.
Common repairs: motor and transmission cases, chain guards, props and skegs, oil pans, etc.
Aluminum wheel repair service
To save you time and money we use cagekits.org for our certified FIA/FD spec cages, and rhodesracecars.com for our 4-10 point cages. If neither of these suppliers support your chassis we are happy to custom fabricate a solution for your application and needs.
Starting price for 4 point weld in roll cage/bar installation is $1800 +tubing kit
Full spec weld in cage installation starting at $4500 +tubing kit
To book your installation please give us a call at 2048814609
Starting price for 4 point weld in roll cage/bar installation is $1800 +tubing kit
Full spec weld in cage installation starting at $4500 +tubing kit
To book your installation please give us a call at 2048814609
Price to cut, reinforce, weld and extend LCA's (typically by 1") Control arms must removed from vehicle at time of drop off. Removal is available, please call for a quotation.
Additional undressing fee starting at $30 if ball joints or links are not removed.
Additional undressing fee starting at $30 if ball joints or links are not removed.
Price to reinforce open differential spider gears with 3/8" steel plate and weld differential for full time lock. Must be removed, opened and drained at time of drop off.
Additional cleaning fees for undrained differentials starting at $30
Additional cleaning fees for undrained differentials starting at $30
The price to "Cut" and "Shut" removed OEM Steel knuckles. (Bump steer correction available as requested)
Undressing fee starting at $30 if all joint and heat shields not removed prior to drop off.
Undressing fee starting at $30 if all joint and heat shields not removed prior to drop off.
Winnipeg winters are hard on vehicles, salt and ice build up lead to corrosion and rust, degrading the integrity and lifespan of your vehicle. Our annual rust proofing service utilizes a dripless, non-drying, specialized all-season rust protectant with a pleasant bubble gum scent designed to penetrate and adhere to metal, arresting present rust and preventing future corrosion from ever starting.
The application process includes, thorough coating of the entire chassis' undercarriage, internal cavities including rocker panels utilizing our specialty application wands. Common areas such as wheel wells, fender arches, door jams, trunk and hood seams, rad support and engine bay coated.
The application process includes, thorough coating of the entire chassis' undercarriage, internal cavities including rocker panels utilizing our specialty application wands. Common areas such as wheel wells, fender arches, door jams, trunk and hood seams, rad support and engine bay coated.
Winnipeg winters are hard on vehicles, salt and ice build up lead to corrosion and rust, degrading the integrity and lifespan of your vehicle. Our annual rust proofing service utilizes a dripless, non-drying, specialized all-season rust protectant with a pleasant bubble gum scent designed to penetrate and adhere to metal, arresting present rust and preventing future corrosion from ever starting.
The application process includes, thorough coating of the entire chassis' undercarriage, internal cavities including rockers and frame rails internally and externally coated utilizing our specialty application wands. Common areas such as wheel wells, fender arches, door jams, trunk and hood seams, rad support and engine bay coated.
Please note: it is highly recommended first time applicants with vehicles older than 3 years purchase our frame descaling/restoration service. This is to ensure any present road salt and mud is thoroughly removed before application. Trapping this harmful debris is introducing rust accelerants to the vehicles metal. While some shops have a "spray and go" approach only washing what you can visually see. We take pride in providing a thorough targeted service, actually cleaning the areas where rust forms and doing the job right.
The application process includes, thorough coating of the entire chassis' undercarriage, internal cavities including rockers and frame rails internally and externally coated utilizing our specialty application wands. Common areas such as wheel wells, fender arches, door jams, trunk and hood seams, rad support and engine bay coated.
Please note: it is highly recommended first time applicants with vehicles older than 3 years purchase our frame descaling/restoration service. This is to ensure any present road salt and mud is thoroughly removed before application. Trapping this harmful debris is introducing rust accelerants to the vehicles metal. While some shops have a "spray and go" approach only washing what you can visually see. We take pride in providing a thorough targeted service, actually cleaning the areas where rust forms and doing the job right.
Winnipeg winters are hard on vehicles, salt and ice build up lead to corrosion and rust, degrading the integrity and lifespan of your vehicle. Our annual rust proofing service utilizes a dripless, non-drying, specialized all-season rust protectant with a pleasant bubble gum scent designed to penetrate and adhere to metal, arresting present rust and preventing future corrosion from ever starting.
The application process includes, thorough coating of the entire chassis' undercarriage, internal cavities including rocker panels utilizing our specialty application wands. Common areas such as wheel wells, fender arches, door jams, trunk and hood seams, rad support and engine bay coated.
The application process includes, thorough coating of the entire chassis' undercarriage, internal cavities including rocker panels utilizing our specialty application wands. Common areas such as wheel wells, fender arches, door jams, trunk and hood seams, rad support and engine bay coated.
Generic 2 hour time slot, someone will contact you if this is to be used for your appointment.
On lift estimate
Grow your brand with Setmore